How to Make Ear Wires or How Lefties Make Them - Me Anyway

Hollow Bead Earrings by Wind Dancer Studios

There are lots of ways to make ear wires and I use several of those methods myself. This is my go to method - it’s very basic and assumes you have some knowledge of working with wire and don’t need me to tell you cutters cut people too, files ruin manicures, and hammers hurt when you smash a thumb or fingernail.

I made a pair of hollow beads for the Year of Jewelry project  and thought hey! why not share how I make the ear wires for these? If my fingers look a little dirty that would be why, that and the glitter nail polish lol So I just grabbed the camera and shot photos as I worked. 

DISCLAIMER!!! I AM A LEFTIE, I use both hands when making jewelry so I don’t always realize when things might look backwards to you - if it looks backwards just mirror it and it should work out just fine! If you’re a leftie HI! isn’t it nice to know there are more of us?!

OK Let’s get started!

Step 1) Cut two pieces of 20 ga wire two inches long.

I use Tronex Razor Flush Cutters I heart my Tronex!

Step 2)  Debur your ends on both ends. You can use a bur cup, fish hook sharpener or a nail file. Just file them smooth, nothing worse than sharp wires poking you in the ears. (ok maybe a few things..but…)

Deburring with a cup bur
got mine at Fire Mountain Gems

Demurring with a nail file 180 grit

Step 3) Straighten and work harden your wires. You can use nylon jaw pliers for this or use a bench block but I like rolling the wire between the anvil and an altoids tin or the ruler, whichever is closest at hand. There’s no curve to the wire once you’re done and it has a slight spring to it.

Don't you love my baby anvil! It's so tiny!
Hubs found this one at a yard sale, my other one is 15 lbs
cast and sits on my other desk.

Roll wire between anvil and ruler to straighten and work harden.

Step 4) On one end of each wire form simple loops, this will be where you add your dangle etc.

Form a simple loop on one end.

Simple loops, I didn't center the loops but you could.

Step 5) Take your bail making pliers and wrap both wires around the larger barrel leaving the tail longer.

You can use wood dowelling, a sharpie or a pencil, anything smooth and round.

Forming wires on bail making pliers - large barrel side.
These are Bead Smith pliers.

Form both wires at once so they match.

Step 6) Most people stop there but I like to go one more and slide my wires onto the smaller barrel and tuck the dangle side in for a tighter curl.

Slide both wires onto smaller barrel for a tighter curl on the backside.

Step 7) At this point you can slide a bead onto the wire if you want. I like to add a little matching detail to my wire so they match my earrings.

Adding a bead for color.

Step 8) Now grab the wire just behind the bead and give a little bend to help hold the bead in place. This also balances the wire a little bit so your dangles hang straight down.

Securing the bead in place.
I'm using Wubbers Chain Nose pliers.

Step 9) Place your ear wire on the anvil or bench block and give the backside of the curve a little tap. This hardens the curve and helps it keep its shape. Some people don’t like the flattened wire, especially with a heavy earring, to keep the wire round use a rubber mallet or a leather mallet instead. Both will harden your wire without distorting it’s shape.

Hardening the back edge. I'm using a finish hammer,
it has a slightly domed smooth face with no hard edges.
Sometimes I steal the hubs MAC chasing hammer
for auto body work, it has a much smaller head, great for
precision work!

Step 10)All that’s left is to add your dangle and voila you have just made your own ear wires.

TaDaaa!

Hollow Bead Earrings by Wind Dancer Studios

Please excuse the stacked trays in the background, I just realized they were there lol I was using those to keep my components together as I worked on my Muchas Musings Lines. They allowed me to keep components with the sketches so I wasn't constantly looking for where they went. Take out tubs are AWESOME for this, lids and see through.

I hope you enjoyed seeing me make these and if you did please leave a comment. 

Comments will encourage me to retake those photos for the rose tutorial......

Thanks for stopping by!

We'll see you next time!